目录函数声明定义输入输出变量函数代码简化程序main函数详细代码B站视频函数声明定义输入输出变量调用函数函数代码简化程序main函数详细代码/* USER CODE BEGIN Header */ /** ****************************************************************************** * file : main.c * brief : Main program body ****************************************************************************** * attention * * Copyright (c) 2026 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include main.h #include gpio.h /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ /* USER CODE BEGIN PTD */ /* USER CODE END PTD */ /* Private define ------------------------------------------------------------*/ /* USER CODE BEGIN PD */ /* USER CODE END PD */ /* Private macro -------------------------------------------------------------*/ /* USER CODE BEGIN PM */ /* USER CODE END PM */ /* Private variables ---------------------------------------------------------*/ /* USER CODE BEGIN PV */ /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ void SystemClock_Config(void); /* USER CODE BEGIN PFP */ void Y_OUTPUT (void); void X_INPUT (void); /* USER CODE END PFP */ /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ uint16_t i10 ,i20; uint16_t X00, Y00 ; uint16_t M0; /* USER CODE END 0 */ /** * brief The application entry point. * retval int */ int main(void) { /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ /* MCU Configuration--------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* USER CODE BEGIN Init */ /* USER CODE END Init */ /* Configure the system clock */ SystemClock_Config(); /* USER CODE BEGIN SysInit */ /* USER CODE END SysInit */ /* Initialize all configured peripherals */ MX_GPIO_Init(); /* USER CODE BEGIN 2 */ /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ X_INPUT ();//输入引脚 // HAL_GPIO_WritePin(Y0_GPIO_Port, Y0_Pin, GPIO_PIN_RESET); // HAL_Delay(500); // HAL_GPIO_WritePin(Y0_GPIO_Port, Y0_Pin, GPIO_PIN_SET); // HAL_Delay(500); // Y01; //输出引脚 Y_OUTPUT (); } /* USER CODE END 3 */ } /** * brief System Clock Configuration * retval None */ void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct {0}; /** Initializes the RCC Oscillators according to the specified parameters * in the RCC_OscInitTypeDef structure. */ RCC_OscInitStruct.OscillatorType RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState RCC_HSE_ON; RCC_OscInitStruct.HSEPredivValue RCC_HSE_PREDIV_DIV1; RCC_OscInitStruct.HSIState RCC_HSI_ON; RCC_OscInitStruct.PLL.PLLState RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLMUL RCC_PLL_MUL9; if (HAL_RCC_OscConfig(RCC_OscInitStruct) ! HAL_OK) { Error_Handler(); } /** Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider RCC_HCLK_DIV2; RCC_ClkInitStruct.APB2CLKDivider RCC_HCLK_DIV1; if (HAL_RCC_ClockConfig(RCC_ClkInitStruct, FLASH_LATENCY_2) ! HAL_OK) { Error_Handler(); } } /* USER CODE BEGIN 4 */ /** * brief Y_OUTPUT * retval None */ void Y_OUTPUT (void) { if(Y0) //读取PA0引脚是否为高电平 { HAL_GPIO_WritePin(Y0_GPIO_Port, Y0_Pin, GPIO_PIN_RESET);//把Y0引脚电平置底 led点 } else { HAL_GPIO_WritePin(Y0_GPIO_Port, Y0_Pin, GPIO_PIN_SET);//把Y0引脚电平置搞 led关闭 } } /** * brief X_INPUT * retval None */ void X_INPUT (void) { if (HAL_GPIO_ReadPin(X0_GPIO_Port,X0_Pin)SET) { X01; } else { X00; } } /* USER CODE END 4 */ /** * brief This function is executed in case of error occurrence. * retval None */ void Error_Handler(void) { /* USER CODE BEGIN Error_Handler_Debug */ /* User can add his own implementation to report the HAL error return state */ __disable_irq(); while (1) { } /* USER CODE END Error_Handler_Debug */ } #ifdef USE_FULL_ASSERT /** * brief Reports the name of the source file and the source line number * where the assert_param error has occurred. * param file: pointer to the source file name * param line: assert_param error line source number * retval None */ void assert_failed(uint8_t *file, uint32_t line) { /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, ex: printf(Wrong parameters value: file %s on line %d\r\n, file, line) */ /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */B站视频https://www.bilibili.com/video/BV1XtEb6HEYp/?spm_id_from333.1387.homepage.video_card.clickvd_source5e9f4d511896df920a31ed33c6d61570